Ancient Monuments

History on the Ground

This site is entirely user-supported. See how you can help.

Greenside lead mines, ore works and smelt mill

A Scheduled Monument in Patterdale, Cumbria

We don't have any photos of this monument yet. Why don't you be the first to send us one?

Upload Photo »

Approximate Location Map
Large Map »

If Google Street View is available, the image is from the best available vantage point looking, if possible, towards the location of the monument. Where it is not available, the satellite view is shown instead.

Coordinates

Latitude: 54.5518 / 54°33'6"N

Longitude: -2.9913 / 2°59'28"W

OS Eastings: 335979.364614

OS Northings: 517842.770156

OS Grid: NY359178

Mapcode National: GBR 7HKT.53

Mapcode Global: WH81M.0VVF

Entry Name: Greenside lead mines, ore works and smelt mill

Scheduled Date: 11 June 1996

Last Amended: 8 April 1997

Source: Historic England

Source ID: 1015654

English Heritage Legacy ID: 27751

County: Cumbria

Civil Parish: Patterdale

Traditional County: Westmorland

Lieutenancy Area (Ceremonial County): Cumbria

Church of England Parish: Patterdale St Patrick

Church of England Diocese: Carlisle

Details

The monument includes a number of lead mines and their associated buildings,
water management systems, trackways, tramways and dressing areas, which
collectively are known as the Greenside lead mines. These mines are located
over a large area of fellside to the north of Glenridding Beck; the oldest and
uppermost workings lie on the flanks of Greenside and the most recent and
lowest lying sites occur near the floor of the Glenridding valley. At the
highest point lies the High Horse Level mine and its associated structures.
Below this are the Swart Beck dressing floors and further down the beck lie
the Low Horse Level workings. Further down still, close to the confluence of
Glenridding Beck and Swart Beck, are the Lucy Tongue workings.
The area immediately to the north and east of the High Horse Level is
dominated by a line of massive collapses caused by subsistence of the
underground workings which has destroyed the earliest of the Greenside mines.
Those workings to have survived include the High Horse adit, Gillgowar's adit,
a trial adit, a hush and three prospecting trenches. Other surviving features
include two waste heaps, traces of an extensive water management system which
includes three reservoirs and a number of leats, a tramway, a track, and the
remains of four buildings including a miner's lodging house and a former
office and smithy. To the west of the High Horse workings lies Top Dam, a
large reservoir constructed to supply water to the Swart Beck dressing floors,
the Low Horse Level workings, and the Lucy Tongue Level.
Between the High Horse level and the Swart Beck dressing floors there is a
hand-picking area which formed the collecting point for unsorted rock from the
High Horse working to which it was linked by a tramway. Some of this waste was
processed in-situ, the remainder was transported to spoil heaps to the south
west by a further tramway. A ruined building near to the hand-picking area is
thought to have been the mine office or a lodging house.
The Swart Beck dressing floor was linked to the High Horse Level workings by a
tramway and several tracks, and was connected to the Lucy Tongue Level
workings by a zig-zag pack horse track. The main processing machinery occupied
the east bank of the beck and remains of various structures survive including
a crushing mill and a nearby buddle which provided the second stage of
ore-processing following the crushing. Waste dumps, leats, a tramway, a fine
processing area, settling tanks and a dam also survive on the dressing floor.
On the west side of the beck there are further waste dumps, slime pits or
settling tanks, a trackway and the remains of a building thought to have been
a lodging house for the dressing floor workers or a tackle shop for
packhorses.
A short distance downstream there is a small dam and a water tank which formed
part of the water catchment for the Low Horse Level workings. The principal
workings of the Low Horse Level, however, are situated lower down on the
western side of Swart Beck where the steep hillside was terraced to
accommodate a variety of features and structures associated with the
ore-processing. The adit is situated on the eastern side of Swart Beck; ore
was removed along a tramway which crossed the beck on a bridge, now
demolished, to the uppermost of three terraces from where the ore was fed
directly into six bouse teams, remains of which still survive. From three of
these bouse teams the ore was funnelled onto a washing floor on the second
terrace, while from the other three bouse teams the ore was transferred to a
crusher on the third terrace. Once processed the waste was removed by waggon
from the second terrace across another bridge, also demolished, to tips on the
east side of Swart Beck. In addition to the bouse teams the upper terrace
contains remains of retaining walls, tramways, leats, and three buildings
thought to have been offices, lodgings and stables. Hand-picking took place on
the second terrace and, although erosion has carried away large parts of this
terrace, various lengths of retaining wall still survive as does a bridge
abutment on the east side of the beck opposite the terrace. Fragments of two
hoppers can be seen in the lower part of the workings together with traces of
a winding house at the top a long incline. The site of the crushing mill is
still visible and its wheel-pit survives reasonably well. Much of the adjacent
third terrace has been lost to erosion and only small fragments of buildings
survive. On the east side of the beck, adjacent to the spoil heap, are several
trackbeds for the waggons which carried the waste, together with the remains
of two buildings interpreted as a tackle shop for the mine's horses and the
gunpowder store for the mine.
The Lucy Tongue workings are built across the northern slope of the steep
sided Glenridding valley. This has necessitated construction of stone
revetment walls to create terraces on which buildings and ore-processing
machinery were established. The lowest or first terrace contained the smelt
mill and ore-processing complex, and of the range of buildings which stood
here only the smelt mill survives. It now functions as a private hostel,
however, during renovation in 1989 an early type of reverbatory furnace was
discovered in the western end of the building built into the floor of the
building, whilst the eastern end is reputed to have been associated with water
wheels and slag hearths. An open area immediately north of this building was
the site of smelting hearths. On the west side there is a wall containing two
chutes down which ore travelled into the hearths. An alcove set into the south
wall of this open area contains fire bricks and is thought to be the site of a
hearth. A flue of the smelter was designed to aid the precipitation of lead
and silver suspended in the fumes produced by the smelting process. This flue
took the form of a long stone-built chimney which ascended the hill from the
smelter and ended at a vertical chimney c.1.5km away on the summit of Stang
End. Although largely collapsed the course of this flue is traceable for
virtually its whole length and the lower courses of the chimney remain
standing. Remains of a sawmill are located on the northern bank of Glenridding
Beck and close by is a large wheelpit which is thought to have been the
sawmill's power source. The second terrace has the remains of two bridge
abutments which supported both a tramway to convey waste from the Lucy Tonge
workings to tips on the east side of Swart Beck, and several ore processing
buildings. Other concrete foundations survive including those of buildings
which housed a Symonds Crusher and a crude ore bin. The third terrace housed
slime pits and various buildings including a crushing mill; none of which
survive now. Other features included a number of buddles and a building
through which entrance to Lucy Tongue Level was gained; some foundations of
this building, which contained miner's baths, still survive. The fourth
terrace is the highest surviving terrace. It was originally occupied by a
crushing mill located at the base of the incline from Low Horse Level and
powered by a water wheel. This was later replaced by Power House No 2 which
itself has since been removed. A fifth terrace has been destroyed by
subsequent waste tipping.
Mining commenced at Greenside during the mid/late 17th century at the area
around High Horse Level. About 1825 the Greenside Mining Syndicate took over
mining operations and developed a crushing and washing mill on the site of the
original washings on the Swart Beck dressing floor. In the mid-1830s the Low
Horse Level commenced and about the same time a smelt mill and flue was built
at the foot of Lucy Tongue. In 1868 the Lucy Tongue Level was opened.
Production finally ceased at Greenside in 1962.
All buildings, modern walls, fenceposts, gateposts, telegraph poles and the
surfaces of all paths are excluded from the scheduling but the ground beneath
all these features is included.

MAP EXTRACT
The site of the monument is shown on the attached map extract.

Source: Historic England

Reasons for Scheduling

Approximately 10,000 lead industry sites are estimated to survive in England,
spanning nearly three millennia of mining history from the later Bronze Age
(c.1000 BC) until the present day, though before the Roman period it is likely
to have been on a small scale. Two hundred and fifty one lead industry sites,
representing approximately 2.5% of the estimated national archaeological
resource for the industry, have been identified as being of national
importance. This selection of nationally important monuments, compiled and
assessed through a comprehensive survey of the lead industry, is designed to
represent the industry's chronological depth, technological breadth and
regional diversity.
Nucleated lead mines are a prominent type of field monument produced by lead
mining. They consist of a range of features grouped around the adits and/or
shafts of a mine. The simplest examples contain merely a shaft or adit with
associated spoil tip, but more complex and (in general) later examples may
include remains of engine houses for pumping and/or winding from shafts,
housing, lodging shops and offices, powder houses for storing gunpowder, power
transmission features such as wheel pits, dams and leats. The majority of
nucleated lead mines also included ore works, where the mixture of ore and
waste rock extracted from the ground was separated ('dressed') to form a
smeltable concentrate. The range of processes used can be summarised as:
picking out of clean lumps of ore and waste; breaking down of lumps to smaller
sizes (either by manual hammering or mechanical crushing); sorting of broken
material by size; separation of gravel-sized material by shaking on a sieve in
a tub of water ('jigging'); and separation of finer material by washing away
the lighter waste in a current of water ('buddling'). The field remains of ore
works vary widely and include the remains of crushing devices, separating
structures and tanks, tips of distinctive waste from the various processes,
together with associated water supply and power installations, such as wheel
pits and, more rarely, steam engine houses.
The majority of nucleated lead mines with ore works are of 18th to 20th
century date, earlier mining being normally by rake or hush and including
scattered ore dressing features (a 'hush' is a gully or ravine partly
excavated by use of a controlled torrent of water to reveal or exploit a vein
of mineral ore). Nucleated lead mines often illustrate the great advances in
industrial technology associated with the period known as the Industrial
Revolution and, sometimes, also inform an understanding of the great changes
in social conditions which accompanied it. Because of the greatly increased
scale of working associated with nucleated mining such features can be a major
component of many upland landscapes. It is estimated that several thousand
sites exist, the majority being small mines of limited importance, although
the important early remains of many larger mines have often been greatly
modified or destroyed by continued working or by modern reworking. A sample of
the better preserved sites, illustrating the regional, chronological and
technological range of the class, is considered to merit protection.

Ore hearth smelt mills were introduced in the 16th century and continued to
develop until the late 19th century. They were the normal type of lead smelter
until the 18th century, when they were partially replaced by the reverberatory
smelt mill. The ore hearth itself consisted of a low open hearth, in which
lead ore was mixed with fuel (initially dried wood, later a mixture of peat
and coal). An air blast was supplied by bellows, normally operated by a
waterwheel; more sophisticated arrangements were used at some 19th century
sites. The slags from the ore hearth still contained some lead. This was
extracted by resmelting the slags at a higher temperature using charcoal or
(later) coke fuel, normally in a separate slag hearth. This was typically
within the ore hearth smelt mill, though separate slag mills are known.
Early sites were typically small and simple buildings with one or two hearths,
whereas late 18th and 19th century smelt mills were often large complexes
containing several ore and slag hearths, roasting furnaces for preparing the
ore, refining furnaces for extracting silver from the lead by a process known
as cupellation, and reducing furnaces for recovering lead from the residue or
litharge produced by cupellation, together with sometimes complex systems of
flues, condensers and chimneys for recovering lead from the fumes given off by
the various hearths and furnaces. The ore hearth smelt mill site will also
contain fuel stores and other ancillary buildings.
Ore hearth smelt mills have existed in and near all the lead mining fields of
England, though late 18th and 19th century examples were virtually confined to
the Pennines from Yorkshire northwards (and surviving evidence is strongly
concentrated in North Yorkshire). It is believed that several hundred examples
existed nationally. The sample identified as meriting protection includes: all
sites with surviving evidence of hearths; sites with intact slag tips of
importance for understanding the development of smelting technology; all 16th-
17th century sites with appreciable standing structural remains; 16th-17th
century sites with well preserved earthwork remains; and a more selective
sample of 18th and 19th century sites to include the best surviving evidence
for smelt mill structures, and flue/condenser/chimney systems.
Greenside lead mine was one of the most successful lead mining ventures in
northern England. Mining took place almost continuously over a period of 300
years and during this time the mine owners were highly innovative in their use
of new technology which helped to maintain the productivity and success of the
mines. The monument contains a wide range of surviving features associated
with the full lifespan of the mining complex.

Source: Historic England

Sources

Books and journals
RCHME, , The Greenside Lead Mines, (1991), 1-31
RCHME, , The Greenside Lead Mines, (1991), 1-47
RCHME, , The Greenside Lead Mines, (1991), 1-23
RCHME, , The Greenside Lead Mines, (1991), 1-40

Source: Historic England

Other nearby scheduled monuments

AncientMonuments.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact AncientMonuments.uk for any queries related to any individual ancient or schedued monument, planning permission related to scheduled monuments or the scheduling process itself.

AncientMonuments.uk is a Good Stuff website.