Ancient Monuments

History on the Ground

This site is entirely user-supported. See how you can help.

Beldi Hill Low Level lead mine and ore works

A Scheduled Monument in Muker, North Yorkshire

We don't have any photos of this monument yet. Why don't you be the first to send us one?

Upload Photo »

Approximate Location Map
Large Map »

If Google Street View is available, the image is from the best available vantage point looking, if possible, towards the location of the monument. Where it is not available, the satellite view is shown instead.

Coordinates

Latitude: 54.402 / 54°24'7"N

Longitude: -2.1509 / 2°9'3"W

OS Eastings: 390298.476093

OS Northings: 500734.664879

OS Grid: NY902007

Mapcode National: GBR FKFJ.4S

Mapcode Global: WHB51.XMX7

Entry Name: Beldi Hill Low Level lead mine and ore works

Scheduled Date: 24 December 1996

Source: Historic England

Source ID: 1015408

English Heritage Legacy ID: 28248

County: North Yorkshire

Civil Parish: Muker

Traditional County: Yorkshire

Lieutenancy Area (Ceremonial County): North Yorkshire

Details

The monument includes the remains of Beldi Hill Low Level lead ore works and
mine level situated on the steep sided east bank of the River Swale 3km south
of Keld.
The monument is laid out on four terraces, partly cut into the hillside, and
includes the entrance to an adit, or horizontal mine tunnel, a spoil or waste
tip, bouse teams (for storing rough sorted ore), ore crusher, wheelpit and
washing and dressing floors for making ore ready for smelting. The monument
also includes a range of water management features and the low earthwork
remains of a large building. The main water supply for the processing was from
the beck known as Oldfield Gutter which passes through the site, with the mine
and spoil tip lying to the west and the ore works to the east.

The adit entrance emerges on the uppermost terrace and some of the rails for
moving the ore tubs are still in place. Waste from the workings was tipped to
the north where the large spoil tip lies spreading out and down to the lower
terrace level. A wide bridge spans the beck which provided access to the
bouse teams and also formed a dam to help regulate water supply. To the west
of the mine entrance are the remains of a small stone building, possibly a
smithy where tools could be regularly sharpened.

The bouse teams are a group of four horseshoe shaped stone chambers, the top
of which are level with the upper terrace so that the lead ore could be tipped
directly in. To the east of the bouse teams is a chute, cut through the rock,
which fed the ore directly to the crushing plant located on the terrace below.
The crushing plant had two sets of iron rollers, one each side of a water
wheel. Four stone weights for adjusting the space between the rollers survive,
two on either side of the wheel pit.

On the next terrace down are a pair of boat shaped, stone tanks thought to be
wash kilns or separaters. On the lower terrace is a large stone flagged area
with flat buddles (for separating ore in a moving current of water) and
separating tanks. At the east of this washing floor is a boat shaped settling
tank which leads onto a further smaller and slightly lower stone terrace to
the east.

On the river terrace between the lower dressing floor and the river are low
earthwork banks representing the remains of a structure 6m square with a
further structure extending for 10m towards the river. A stone built conduit,
now partly buried, leads south westwards from the east of the dressing floors
which discharged excess water into the river. At the mouth by the river are
traces of a final silt trap, to extract any last residues of ore.

To the west of the monument the course of the beck across the river terrace
has been substantialy widened to form a reservoir up to 12m wide. The
reservoir was dammed at the south end by a stone bridge and along the south
edge of the river terrace traces of stone revetting are visible.

Throughout the monument are drains and leats to channel water to and from the
various processes. Extending from the east of the lower dressing floor is a
stone revetted causeway leading to the smelt mill at Swinner Gill

It is not known exactly when the Beldi Hill complex was developed but sources
suggest that the mine was driven in 1843 and the mine is certainly shown on
the 1857 OS map. The ore works were probably built between these dates and
were in use until the early 1880s when the mine level was abandoned because of
flooding.

The modern wooden footbridge spanning the beck is excluded from the scheduling
although the ground beneath is included.

MAP EXTRACT
The site of the monument is shown on the attached map extract.
It includes a 2 metre boundary around the archaeological features,
considered to be essential for the monument's support and preservation.

Source: Historic England

Reasons for Scheduling

Approximately 10,000 lead industry sites are estimated to survive in England,
spanning nearly three millennia of mining history from the later Bronze Age
(c.1000 BC) until the present day, though before the Roman period it is likely
to have been on a small scale. Two hundred and fifty one lead industry sites,
representing approximately 2.5% of the estimated national archaeological
resource for the industry, have been identified as being of national
importance. This selection of nationally important monuments, compiled and
assessed through a comprehensive survey of the lead industry, is designed to
represent the industry's chronological depth, technological breadth and
regional diversity.
Nucleated lead mines are a prominent type of field monument produced by lead
mining. They consist of a range of features grouped around the adits and/or
shafts of a mine. The simplest examples contain merely a shaft or adit with
associated spoil tip, but more complex and (in general) later examples may
include remains of engine houses for pumping and/or winding from shafts,
housing, lodging shops and offices, powder houses for storing gunpowder, power
transmission features such as wheel pits, dams and leats. The majority of
nucleated lead mines also included ore works, where the mixture of ore and
waste rock extracted from the ground was separated ('dressed') to form a
smeltable concentrate. The range of processes used can be summarised as:
picking out of clean lumps of ore and waste; breaking down of lumps to smaller
sizes (either by manual hammering or mechanical crushing); sorting of broken
material by size; separation of gravel-sized material by shaking on a sieve in
a tub of water ('jigging'); and separation of finer material by washing away
the lighter waste in a current of water ('buddling'). The field remains of ore
works vary widely and include the remains of crushing devices, separating
structures and tanks, tips of distinctive waste from the various processes,
together with associated water supply and power installations, such as wheel
pits and, more rarely, steam engine houses.
The majority of nucleated lead mines with ore works are of 18th to 20th
century date, earlier mining being normally by rake or hush and including
scattered ore dressing features (a 'hush' is a gully or ravine partly
excavated by use of a controlled torrent of water to reveal or exploit a vein
of mineral ore). Nucleated lead mines often illustrate the great advances in
industrial technology associated with the period known as the Industrial
Revolution and, sometimes, also inform an understanding of the great changes
in social conditions which accompanied it. Because of the greatly increased
scale of working associated with nucleated mining such features can be a major
component of many upland landscapes. It is estimated that several thousand
sites exist, the majority being small mines of limited importance, although
the important early remains of many larger mines have often been greatly
modified or destroyed by continued working or by modern reworking. A sample of
the better preserved sites, illustrating the regional, chronological and
technological range of the class, is considered to merit protection.

The ore works complex at Beldi Hill Low Level is one of the best preserved in
the Yorkshire Dales. Many of the original features and some unusual structures
still survive. The monument illustrates well the development of lead ore
processing techniques and will contribute greatly to the study of the lead
industry both locally and nationally.

Source: Historic England

Sources

Books and journals
Barker, J L R, White, R F, A Consolidation project at Beldi Hill Dressing Floor, Keld, (1996)
Northern Archaeological Associates, , Beldi Hill Dressing Floor, Keld, (1995)

Source: Historic England

Other nearby scheduled monuments

AncientMonuments.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact AncientMonuments.uk for any queries related to any individual ancient or schedued monument, planning permission related to scheduled monuments or the scheduling process itself.

AncientMonuments.uk is a Good Stuff website.