Ancient Monuments

History on the Ground

This site is entirely user-supported. See how you can help.

The Incline, lying between Brendon Hill and Comberow, and the remains of Combe Row Station

A Scheduled Monument in Old Cleeve, Somerset

We don't have any photos of this monument yet. Why don't you be the first to send us one?

Upload Photo »

Approximate Location Map
Large Map »

If Google Street View is available, the image is from the best available vantage point looking, if possible, towards the location of the monument. Where it is not available, the satellite view is shown instead.

Coordinates

Latitude: 51.1048 / 51°6'17"N

Longitude: -3.3923 / 3°23'32"W

OS Eastings: 302616.761293

OS Northings: 134869.826993

OS Grid: ST026348

Mapcode National: GBR LN.BLDM

Mapcode Global: VH6H1.4HZD

Entry Name: The Incline, lying between Brendon Hill and Comberow, and the remains of Combe Row Station

Scheduled Date: 3 September 2004

Source: Historic England

Source ID: 1021350

English Heritage Legacy ID: 33072

County: Somerset

Civil Parish: Old Cleeve

Traditional County: Somerset

Lieutenancy Area (Ceremonial County): Somerset

Details

The monument includes the remains of the Incline, a cable operated section of
the West Somerset Mineral Railway, the ruins of the cable winding house which
stands at the top of the incline, and the ruins of Combe Row station which
lie at its base.
The West Somerset Mineral Railway (WSMR) was constructed between 1856 and
1864 to carry iron ore from the Brendon Hills to the port of Watchet for
onward shipment to the South Wales smelting furnaces. The WSMR was a standard
gauge line 18.5km long designed by the engineer Rice Hopkins. The iron ore
mines were 380m above sea level and to reach them from Watchet the line
followed the course of the Washford river valley to Combe Row (now Comberow)
where a 1030m long double track gravity operated incline was constructed at a
gradient of 1:4. At the top of the incline the railway reverted to a
locomotive line and turned to the west before terminating at Gupworthy mine.
The trackbed of the incline is virtually intact for its entire length of over
1km. It survives as a combination of embanked earthwork and cutting with an
average width of 30m, although this varies depending upon the terrain. At two
places the trackbed is supported across gaps by means of stone bridges known
as underbridges. One of these carries the incline over the road into
Comberow; the other is about 200m higher up to the south west and it crosses
over an old track. Both underbridges are constructed of local stone cut into
ashlar blocks for the arches, with roughcast stone providing the body of the
bridge and its abutments. A number of contemporary features were constructed
to support the effective operation of the incline and some of these survive.
They include buttressed retaining walls, a stone-built culvert to take a
drainage adit stream beneath the incline, three weirs to control the flow of
the stream to prevent undermining of the embankment, and a stone-cut dipping
well to provide water for lubricating the wheels of the wagons which ran up
and down the incline.
The self-acting operation of the incline was effected by means of two massive
cast iron drums each 5.48m in diameter which were mounted on a single axle
supported by four cast iron frames bolted to the floor of the winding house
which stood at the top of the incline. Two iron wire ropes of equal length
were taken, one from the top of the northern drum, and one from the bottom of
the southern, so that as one cable was unwound by the descent of the loaded
ore wagon; the other cable, attached to an empty or lightly loaded wagon, was
drawn up the incline by the cable winding round the second drum; drum brakes
allowed fine tuning of the speed of descent if necessary. The bolt fittings
which anchored the drum frames to the winding house floor survive as do the
stone-lined ducts for the cables which extend about 45m downslope from the
winding house. The duct for the lower cable was tunnelled through the rock so
that the cable could be correctly positioned at the base of the southern drum
whilst its companion, the upper cable, entered the winding house at roof
height and connected to the top of the northern drum. The accommodation for
the winding house engineer (known as Drum Cottage) is incorporated into the
east side of the winding house and some floor surfaces, plastered walls, and
a fireplace survive, as do the window apertures in the east wall. The walls
of the winding house, constructed of local stone, survive to a height of
5.25m although they have been partly restored at higher levels in 1942 and
again in 2002; the roof is missing. The winding house has dimensions,
including the Drum Cottage accommodation, of 14m x 8.5m.
At the base of the incline, where the railway meets more level ground, are
the ruins of Combe Row station. Surviving are the remains of the station
platform which is 25m long, 6m wide, and 0.7m high and the revetment wall of
the station building which stood upon it and served as waiting rooms and a
booking office for the passenger section of the line which ran between Combe
Row and Watchet and, unofficially, between Combe Row and Gupworthy. Also
surviving are the remains of a stone structure for supporting a locomotive
water tank and the buried remains of a culvert. The Incline operated on a
self-acting basis from 1861 until the mines closed in 1883. The winding house
machinery was subsequently converted to steam haulage and the line continued
in use for a further 15 years until 1898 providing a mine salvage, light
goods, and passenger service between Watchet and Gupworthy, although
passengers were carried in open trucks on the incline at their own risk.
After a short period of closure the line was reopened in 1907 when the mines
were thought still to be workable for iron ore but the venture had collapsed
by 1909 and the rails were removed in 1916-17 for the war effort. The winding
house drums were dismantled by being blown up and it was this operation which
led to the subsequent need for restoration of the partly demolished walls
damaged in the explosion. Much of the information obtained for this
scheduling is derived from the published work of Mike Jones a member of the
Exmoor Mines Research Group who has also produced detailed plans of the
incline.
All access steps, fixed information boards, telegraph poles, fencing, gates
and gateposts are excluded from the scheduling, although the ground beneath
all these features is included.

MAP EXTRACT
The site of the monument is shown on the attached map extract.

Source: Historic England

Reasons for Scheduling

In the West Country, Brunel's broad gauge railway reached Exeter St Davidsin
1844 whilst the standard gauge of the London and South Western Railway opened
to Exeter Queen Street in 1860.

The West Somerset Mineral Railway, constructed in 1856, stands therefore as
an early example of railway engineering in the region and the incorporation
of the Incline, the special self-acting cable section on the steep slope
between Brendon Hill and Combe Row, was considered in the mid-19th century to
be an outstanding piece of technology that attracted many photographers of
the time, and photographic records survive.

The remains of The Incline, including those of the winding house and Combe
Row station at its base, serve as a visible reminder of the industrial
heritage of the Brendon Hills and the part played by the new technologies
which were being made readily available as part of the Industrial Revolution.

The restoration of the winding house by Exmoor National Park is viewed as
part of the eventual presentation of the incline as a publicly accessible
educational resource within a heritage trail by the West Somerset Mineral
Railway Heritage Project.

Source: Historic England

Sources

Books and journals
Atkinson, M (ed), Exmoor's Industrial Archaeology, (1997), 150-2
Atkinson, M (ed), Exmoor's Industrial Archaeology, (1997), 150-2
Sellick, R , The WSM Railway and the story of the Brendon Hills Iron Mines, (1970)

Source: Historic England

Other nearby scheduled monuments

AncientMonuments.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact AncientMonuments.uk for any queries related to any individual ancient or schedued monument, planning permission related to scheduled monuments or the scheduling process itself.

AncientMonuments.uk is a Good Stuff website.