Ancient Monuments

History on the Ground

This site is entirely user-supported. See how you can help.

Chandos Glass Cone, at the junction of Northgate and Valetta Place

A Scheduled Monument in Bridgwater, Somerset

We don't have any photos of this monument yet. Why don't you be the first to send us one?

Upload Photo »

Approximate Location Map
Large Map »

If Google Street View is available, the image is from the best available vantage point looking, if possible, towards the location of the monument. Where it is not available, the satellite view is shown instead.

Coordinates

Latitude: 51.1315 / 51°7'53"N

Longitude: -3.0038 / 3°0'13"W

OS Eastings: 329854.647144

OS Northings: 137396.239344

OS Grid: ST298373

Mapcode National: GBR M5.8W8Z

Mapcode Global: VH7DH.WTCF

Entry Name: Chandos Glass Cone, at the junction of Northgate and Valetta Place

Scheduled Date: 13 June 1977

Last Amended: 7 November 2001

Source: Historic England

Source ID: 1019899

English Heritage Legacy ID: 33726

County: Somerset

Civil Parish: Bridgwater

Built-Up Area: Bridgwater

Traditional County: Somerset

Lieutenancy Area (Ceremonial County): Somerset

Details

The monument includes the remains of an 18th century glasswork firing kiln
known as the Chandos Glass Cone, located in an area of land between the
junction of Northgate and Valetta Place, close to the west bank of the River
Parrett.
The glass kiln was constructed in 1725 as part of an early industrial
enterprise initiated by James Brydges, First Duke of Chandos, and it
originally consisted of a conical brick structure approximately 33m high. A
partial excavation carried out in 1975 revealed the lower courses of the
circular cone wall constructed of handmade bricks resting on blue lias
limestone slabs. The wall is canted inwards to an angle of 15 degrees from the
vertical and is 19.2m in diameter, surviving to between 0.6m to 2.4m high and
1.22m thick in places. An interior earthen floor was located at about 0.9m
below the present ground level with the remains of a substantial furnace
platform, approximately 6m across and 0.75m high situated within the centre.
Fragments of glass bottles and vessels were also recovered.
The kiln was in use for glass making for only a short time, production having
ceased by 1734 after which time it was converted to a pottery kiln. The sites
of a pump house and other ancillary buildings which were built onto the
outside of the cone have been located; these date from the 18th century. Large
quantities of pottery from this period have also been recovered.
Three clay-firing kilns were installed during the period 1840 to 1939 at which
time the kiln was part of the Bridgwater brick and tile industry and produced
domestic utensils and building materials.
The upper part of the cone was demolished in 1943 but the structural remains
of the original glass kiln, which were exposed during the 1975 partial
excavation, have been consolidated and conserved and are now on public display
with open access.
The 20th century viewing platform on the south side of the site is excluded
from the scheduling although the ground beneath it is included.

MAP EXTRACT
The site of the monument is shown on the attached map extract.

Source: Historic England

Reasons for Scheduling

Until the 17th century glass making in Britain was centered mainly in heavily
forested areas where there was a ready supply of fuel for the furnaces and the
raw materials such as sand and potash needed for producing glass. The industry
was necessarily of an itinerant nature, the length of time spent at any one
site depending largely upon the fuel supply. Inordinate amounts of wood were
needed to fuel the glass furnaces and the forests were becoming depleted and
for this reason the industry moved to areas where coal supplies were
available. The impressive brick-built cone structures which housed the glass
furnace and acted as a chimney first appeared in Britain towards the end of
the 17th century.
Despite surviving incomplete, the Chandos Glass Cone at the junction of
Northgate and Valetta Place is one of the earliest industrial sites in the
county, dating to 1725, and is a testament to early attempts by the First Duke
of Chandos to establish an industrial centre in Bridgwater. The site is
believed to represent the earliest exposed remains of a glass kiln in Western
Europe and the chimney is reputed to have been the tallest nationally.
There are several documented historical references to the site which date from
its original construction to the late 19th century and partial excavation has
added to our knowledge of the site and the way in which it functioned.

Source: Historic England

Sources

Books and journals
Hawtin, F, Murless, B J, 'Somerset Industrial Archaeological Society Bulletin' in Bridgwater Glasshouse, , Vol. 3, (1981), 2-5

Source: Historic England

Other nearby scheduled monuments

AncientMonuments.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact AncientMonuments.uk for any queries related to any individual ancient or schedued monument, planning permission related to scheduled monuments or the scheduling process itself.

AncientMonuments.uk is a Good Stuff website.