Ancient Monuments

History on the Ground

This site is entirely user-supported. See how you can help.

Limeworks at The Novers

A Scheduled Monument in Nash, Shropshire

We don't have any photos of this monument yet. Why don't you be the first to send us one?

Upload Photo »

Approximate Location Map
Large Map »

If Google Street View is available, the image is from the best available vantage point looking, if possible, towards the location of the monument. Where it is not available, the satellite view is shown instead.

Coordinates

Latitude: 52.3605 / 52°21'37"N

Longitude: -2.5948 / 2°35'41"W

OS Eastings: 359587.937615

OS Northings: 273768.225483

OS Grid: SO595737

Mapcode National: GBR BQ.SKVF

Mapcode Global: VH845.ZX2V

Entry Name: Limeworks at The Novers

Scheduled Date: 7 June 2007

Source: Historic England

Source ID: 1021423

English Heritage Legacy ID: 36052

County: Shropshire

Civil Parish: Nash

Traditional County: Shropshire

Lieutenancy Area (Ceremonial County): Shropshire

Church of England Parish: Clee Hill

Church of England Diocese: Hereford

Details

The monument includes a series of surface quarries and underground workings
with dumps, associated roadways and tramways, a length of inclined plane and
two draw kilns situated on the southern slope of Knowle Hill in the Clee Hill
district.

The limeworks appears to have been worked over an extended period. The
limestone industry was active in the area from the 17th century and there is
evidence of piecemeal surface quarrying which may date to this period. The
small scale quarrying was replaced by more methodical quarrying on a large
scale witnessed by the large quarries with shelved sides. This culminated in
the adits cut beneath the quarry floors, which may have extended to drift
mines or alternatively may have provided access to the lower levels of the
larger quarries. Stone from the upper adit was carried in wagons down the
inclined plane to the draw kilns to the south. Work at the limeworks is
believed to have ceased around 1913. There is considerable evidence of
shallow surface quarrying across much of the hillside. Amongst the dumps
associated with these workings are scatters of burnt lime indicating that
during the earlier phases of exploitation the lime was burnt in small kilns
adjacent to the quarries. Many of these kilns will have been destroyed by
later activity, but some will survive as buried features. These shallow
workings probably date to the 17th and 18th centuries.

To the centre and north of the monument are the two large quarries with
shelved sides. Waste dumps on these shelves indicate that the different
layers were dug by hand and that the spoil was piled to the side upon the
previous floor level. There is evidence of a collapsed adit below the floor
of the southern quarry. This adit cuts into the base of the quarry from the
south and connects with the inclined plane. The adit mouth is built of
coursed rubble, has straight sides with a round-arched head and is c1.8m
wide. To the east flank wall of the tunnel is a shelter. There is a further
adit to the south of the site at NGR SO59667354 which is also lined with
coursed rubble and leads into the hillside. This adit was probably excavated
to provide access to the deeper limestone and spoil generated during its
cutting forms a substantial dump at NGR SO59607345.

Crossing the site from the north-west to the south-east and running from
north to south are a series of tramways. Running roughly north to south and
connecting from an upper tramway to the area by the large draw kilns is an
inclined plane. The difference in height may have allowed for a
gravity-powered system and there is a platform to the upper end of the
incline which may have formerly supported a drum house. Stone from the larger
quarries was carried in wagons via the inclined plane to the two substantial
draw kilns. These take advantage of the slope of the land in their
construction and are built into the hillside. They stand up to 10m high and
have a rubble lining and circular opening to the top which are about 2m in
diameter. The base of each kiln is funnel shaped with two draw holes which
are approached by a pair of vaulted tunnels. The body of the western kiln is
completely filled, although the tunnels and draw holes are not blocked. The
east kiln has been partially excavated and this latter has draw-hole tunnels
whose entrances are partially blocked. Both kilns have retaining walls built
to the side of the downward slope. Both are buttressed and the eastern kiln
has a tramway bridge abutted to it and set in front.

Fence posts and track or road surfaces are excluded from the scheduling, but
the ground beneath them is included.

MAP EXTRACT
The site of the monument is shown on the attached map extract.

Source: Historic England

Reasons for Scheduling

Limestone or chalk has been the basic ingredient for lime mortar from at
least Roman times. Since the medieval period, lime has also been used as
agricultural fertiliser and, since the early 19th century, widely used in
a variety of other industries: as a flux in blast furnaces, in the
production of gas and oil, and in the chemical, pharmaceutical and food
industries.
The lime industry is defined as the processes of preparing and producing
lime by burning and slaking. The basic raw material for producing lime is
limestone or chalk: when burnt at high temperature (roasted or calcined),
these rocks release carbon dioxide, leaving `quicklime' which, by chemical
reaction when mixed with water (`slaking'), can be turned into a stable
powder - lime. Lime burning sites varied in scale from individual small
lime kilns adjacent to a quarry, to large-scale works designed to operate
commercially for an extended market and often associated with long
distance water or rail transport. Lime burning as an industry displays
well-developed regional characteristics, borne out by the regional styles
of East Anglia, West Gloucestershire or Derbyshire.
The form of kilns used for lime burning evolved throughout the history of
the industry, from small intermittent clamp and flare kilns, to large
continuously fired draw kilns that could satisfy increased demand from
urban development, industrial growth and agricultural improvement.
Small-scale rural lime production continued in the later 19th and 20th
centuries, but this period of the industry is mainly characterised by
large-scale production and the transfer of technologies from the cement
and other industries. The demand for mortars grew steadily during the 19th
and 20th centuries. The successful production of mortars made with
artificial cement represented an economic challenge to lime production and
gradually replaced the use of lime mortars in major construction and
engineering projects.
From a highly selective sample made at national level, around 200 lime
industry sites have been defined as being of national importance. These
have been defined to represent the industry's chronological depth,
technological breadth and regional diversity.


Lime extraction was formerly a well-established industry in the area of Clee
Hill. The lime kilns, associated tramways, adits, inclined plane and quarries
at The Novers form a well-preserved group of features from several different
periods. The size of the draw kilns, which are reputed to have had a
three-month burn, is remarkable and their structures, including the tunnel
approaches to the draw holes, appear to be in good condition.

Source: Historic England

Sources

Other
Shropshire County Council, MSA 2617,

Source: Historic England

Other nearby scheduled monuments

AncientMonuments.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact AncientMonuments.uk for any queries related to any individual ancient or schedued monument, planning permission related to scheduled monuments or the scheduling process itself.

AncientMonuments.uk is a Good Stuff website.